Rainier AWD V8-5.3L VIN P (2004)
1. Remove the key from the ignition.
2. Connect the LF side impact module yellow 2-way connector (1) located under the driver seat.
3. Install the CPA to the LF side impact module yellow 2-way connector (1) located under the driver seat.
4. Install the SIR fuse to the fuse block (1) located in the underhood fuse block.
5. Staying well away from all air bags, turn ON the ignition, with the engine OFF.
5.1.
The AIR BAG indicator will flash 7 times.
5.2.
The AIR BAG indicator will then turn OFF.
6. Perform the Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.