Rainier AWD V8-5.3L VIN P (2004)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement
Removal Procedure
1. Remove the drive belt.
2. Remove the PCM from PCM mounting bracket and move to the side.
3. Remove the power steering pressure hose (1) from power steering pump (2).
4. Remove the power steering pump return hose (3) from power steering pump (2).
5. Remove the power steering pump mounting bolts (3).
6. Remove the power steering pump (1).
7. Remove the power steering pump pulley.
8. If applicable, remove the power steering pump reservoir.
Installation Procedure
1. If applicable, install the power steering pump reservoir.
2. Install the power steering pump pulley.