Rainier AWD V8-5.3L VIN P (2004)
Steering Wheel: Service and Repair
Steering Wheel Replacement
Tools Required
^
J1859-A Steering Wheel Puller
^
J36541-A Steering Wheel Puller Adapter
Removal Procedure
Caution: Refer to Servicing the SIR System Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the inflator module.
3. Remove the horn plunger from the steering column by pressing inward to the stop and rotating horn plunger 90 degrees.
4. Disconnect the steering wheel electrical connector.
5. Remove the retaining nut which secures the steering wheel to the steering wheel shaft.
Notice: When removing the steering wheel, use only the specified steering wheel puller. Do not hammer on the end of the steering column shaft.
Hammering could loosen the plastic injections which maintain the steering column rigidity.
