Rainier AWD V8-5.3L VIN P (2004)
1. Install the run channels to the end gate.
2. Loose install the screws retaining the run channels to the end gate.
3. Install the window.
4. Lower the window down fully into the end gate.
Notice: Refer to Fastener Notice in Service Precautions.
5. Finish tightening the screws retaining the run channels to the end gate.
Tighten the run channel screws to 10 N.m (89 lb in).
6. Install the inner reinforcement panel.
7. Install the end gate trim panel.