Reatta V6-231 3.8L VIN C SFI (1990)
0 = No phone system present.
1 = Phone power "OFF," ignition "ON."
2 = Phone power "ON."
3 = Phone power "ON," no service.
4 = Roam service.
5 = Call in progress.
6 = Call received.
7 = System problem.
BD50
The BATTERY VOLTAGE is displayed in volts between 0 and 25.5.
BD51
The GENERATOR FIELD is displayed in percent (%). A value close to 0% represents minimum regulator oil time and a value close to 100%
represents maximum regulator on time.
BD60
The "VEHICLE SPEED" is displayed in miles per hour from 0 to 159.
BD61
The "ENGINE SPEED" is displayed from 0 to 6,375.
BD70
The "CRUISE SERVO POSITION" is displayed in percent (%) from 0 to 100. A value close to 0% represents closed throttle position and a
value close to 100% represents W.O.T.
BD71
The "OIL PRESSURE SENSOR" is displayed in pressure (psi) from 0 to 80.
BD98
The "IGNITION CYCLE" value is the number of times that the ignition has been cycled to "OFF" since a BCM trouble code was last detected.
If no malfunction has been detected after 50.0 cycles, all BCM codes are cleared.
BD99
The "BCM PROM ID" is displayed as a number, up to four digits long, which can be used to verify that the proper PROM was installed in the
BCM.