Reatta V6-231 3.8L VIN C SFI (1990)
Neutral Safety Switch: Adjustments
1.
Position transaxle shifter assembly in N notch in detent plate, then loosen switch attaching screws.
2.
Rotate switch on shifter assembly until adjustment hole aligns with carrier tang hole.
3.
Insert 3/32 inch gauge pin into adjustment hole to a depth of 5/8 inch on Reatta models and 1989-90 Riviera, Toronado and Trofeo models, or
15/32 inch on Eldorado and Seville models.
4.
Tighten switch mounting bolts, then remove gauge pin.
