Reatta V6-231 3.8L VIN C SFI (1990)
Figure 3
^
Transaxle case bore for the actuator guide is now wider by 0.65 mm (0.026") to accommodate the wider actuator guide. (Figure 3)
Figure 4
^
The parking pawl lockout pin has been eliminated from the final drive parking lock pawl and the effective length reduced about 1.0 mm
(0.039") from bullet to parking gear because of the wider actuator "bullet". (Figure 4)
IMPORTANT:
The new parking lock system will not service past models, unless ALL the components are replaced including the transaxle case.
The transaxle case, parking lock actuator assembly, parking lock pawl and actuator guide are not interchangeable with models
built before September 25, 1989 (Julian Date 268).
DATE OF PRODUCTION CHANGE
Starting September 25, 1989 (Julian Date 268), all HYDRA-MATIC 4T60 (THM 440-T4) will be built with the new parking lock system.
SERVICE PROCEDURE
The new parking lock system will assemble the same way as the previous parking lock system.
SERVICE PARTS INFORMATION
Model
Part Number
Description
Year
Model Usage
8668985
Case - Transaxle (Common)
1990
All Except OLAH
8668986
Case - Transaxle
1990
OLAH
8675325
Guide and Seal Assembly
1990
All