Regal L4-2.0L Turbo (2011)
Rear Door Striker: Adjustments
Rear Side Door Lock Striker Adjustment
Note: To determine if the striker adjustment is required, proceed as follows.
1. Ensure that the door is properly aligned with the door opening before proceeding with the striker adjustment.
2. Open and close the door on the striker (2). Note if the door drags on the striker causing the door to move upward or downward upon contact with
the striker. Also note the closing effort to fully engage the latch.
Note: When the striker bolts have been removed, the striker anchor plate (1) will slip down in the door pillar or quarter panel and the trim will
need to be removed to gain access.
3. Using a soft marker, mark around the striker (2) for reference of the original position. Loosen the striker screws just enough to allow the
movement of the door striker and shims if equipped.