Regal L4-2.0L Turbo (2011)
Transmission Mount: Service and Repair
Transmission Mount Replacement - Left Side
Transmission Mount Replacement - Left Side
Removal Procedure
1. Remove the battery box. Refer to Battery Tray Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair).
2. Prior to removing the mount, mark mount to transmission, mount to body interfaces and fasteners to mount interfaces using spray paint or a marker
for correct positioning during installation.
3. Install the engine support fixture. Refer to Engine Support Fixture (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Support Fixture) for the 2.0L engine or Engine Support Fixture (See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Support Fixture) for the 2.2L or 2.4L engine.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
5. Remove the front transmission mount through bolt (1).