Regal V6-173 2.8L (1988)

Window Frame: Customer Interest
Door/Glass - Comes Off Track
Bulletin 88-10-53
Date Nov '88
Ref. No. 88-255-10
Corp. Ref. No. 831072
SUBJECT:
DOOR GLASS DISENGAGEMENT
MODELS AFFECTED: 1988 REGALS
Comments have been received of door glass assemblies disengaging from channels on 1988 Regals. The following procedure should be followed if this
condition occurs:
1.
Remove the window assembly from the door and inspect (proceed to Step 2 if glass/guides are functional). If the glass guides have become
debonded from the glass or substantial pin guide damage is evident, the glass assembly must be replaced with the following parts.
Part Number 10138344
Right Side
Part Number 10138345
Left Side
FIGURE 1 - FRONT DOOR GLASS RUN CHANNEL
2.
Remove the door glass run channel and front run channel retainer. Replace the run channel with the following parts (See Figure 1).
Part Number
10120598
Right Side
Part Number
10120599
Left Side
Care must be taken to prevent distortion of the glass run channel during installation. Should any distortion occur, the retaining function of the channel
may be decreased and if that is the case, the run channel should be replaced.