Regal V6-191 3.1L (1991)
6.
Heater hoses at heater core.
7.
Convenience center near A/C module.
8.
Rear compartment outlet duct adapter screws.
9.
Rear compartment outlet duct adapter.
10.
A/C module bolt.
11.
A/C module nuts.
12.
Vacuum hose.
13.
Electrical connectors.
14.
A/C module.
Install or Connect
1.
A/C module.
2.
Electrical connectors.
3.
Vacuum hose.
4.
A/C module nuts. Tighten
*
Nuts to 10 N-m (89 lbs.in.).
5.
A/C module bolt. Tighten
*
Bolt to 8 N-m (71 lbs.in.).
6.
Rear compartment outlet duct adapter.
7.
Rear compartment outlet duct adapter screws. Tighten
*
Screws to 1.5 N-m (18 lbs.in.).
8.
Convenience center near A/C module.
9.
Heater hoses at heater core.
10.
A/C lines at evaporator.
11.
Evacuate, charge and leak test the A/C system. Refer to "Discharging, Adding Oil, Evacuating and Charging Procedures" in this section.
12.
Fill coolant system and check for leaks. Refer to Cooling and Radiator (Section 6B).
13.
Rotate engine rearward. Refer to 3.1L V-6 VIN Code T (Section 6A5).
14.
Instrument panel assembly. Refer to Instrument Panel, Clusters and Console (Section 8C).
