Regal V6-191 3.1L VIN M SFI (1995)
2.
Inspect both (right and left) rear brake hoses for proper position (See Figure 1 and 2).
3.
If hose is properly positioned (shown in Figure 2), proceed to Step 16. If hose is incorrectly positioned (shown in Figure 1), proceed to Step 4.
INSPECTION (ON GROUND OR DRIVE-ON HOIST)
1.
Position vehicle on drive-on hoist or leave on ground.
THIS METHOD OF INSPECTION MAY MAKE IT EASIER TO OBSERVE MISPOSITIONED HOSES.