Regal V6-191 3.1L VIN M SFI (1995)
3. Install timing chain dampener to cylinder block as shown.
4. Align the timing mark on the crankshaft sprocket to the timing mark on the bottom of the timing chain dampener.
5. Hold the camshaft sprocket with the timing chain hanging down and install the timing chain to the crankshaft gear.
6. Align the centerline of the locator hole, on the camshaft gear, with the timing mark on top of the timing chain dampener.
7. Align dowel in camshaft with dowel hole in camshaft sprocket.
8. Draw the camshaft sprocket onto camshaft using the mounting bolt.
Tighten Camshaft sprocket mounting bolt to 100 Nm (74 ft. lbs.).
9. Lubricate timing chain with engine oil.
10. Crankcase front cover.
11. Fill cooling system.
12. Negative battery cable.
