Regal V6-191 3.1L VIN M SFI (1995)
Canister Purge Solenoid: Service and Repair
EVAP Canister Purge Solenoid Valve Assembly
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical connector, hose and line from Evaporative Emission (EVAP) solenoid valve.
3. Release lock tab on solenoid bracket. Remove EVAP purge solenoid valve from bracket.
INSTALL OR CONNECT
1. EVAP purge solenoid valve to the engine bracket. Snap the EVAP purge solenoid valve down over the lock tabs of bracket.
2. Inlet hose and electrical connector on solenoid.
3. Negative battery cable.
EVAP HOSES
Refer to "Vehicle Emission Control Information" label for routing of evaporative emission hoses.