Regal V6-191 3.1L VIN M SFI (1995)
Ignition Control Module: Service and Repair
Ignition Coil And Module Installation
Ignition Coils
REMOVE OR DISCONNECT
1. A 6-way connector, 3-way connector and 2-way connector at ignition control module.
2. Spark plug wires from ignition coils.
3. 6 Screws securing ignition coils to ignition control module.
4. Disconnect coils from ignition control module.
5. Ignition control module.
INSTALL OR CONNECT
1. Ignition coils to ignition control module.
2. 6 screws, torque to 4 - 5 Nm (40 lb. in.).
3. Plug wires.
4. 6-way connector, 3-way connector and 2-way connector to module.
