Regal V6-231 3.8L VIN A 2-bbl (1982)
FIGURE 4 - NEW DESIGN SPACER PLATE
SERVICE INFORMATION
The spacer plate and gaskets are included in the 1982 service packages to prevent mixing of the new and past design spacer plates. New gaskets (Figure
#3) can be used with new and past design control valve assemblies. New spacer plates (Figure #4) cannot be used with past design control valve
assemblies.
FIGURE 2 - NEW DESIGN CONTROL VALVE ASSEMBLY WITH T.C.C. VALVE TRAIN ELIMINATED
Location of the solid bushing is important. Locate the bushing so that the coiled pin fits into the groove of the bushing (Figure #2).
