Regal V6-231 3.8L VIN L SFI (1990)
FIGURE 2
1.
Lower front door window glass and remove (pry off) plastic Shoulder belt plug cover working from the outside of vehicle (Fig. 2, View "A").
2.
Remove nut and rubber washer from guide loop stud using tool J-39049 (Fig. 2, View "B") to prevent guide loop from turning while removing nut.
Retain rubber washer for reinstallation.
NOTICE:
Certain early production vehicles may utilize a shoulder on trim cover in place of rubber washer. This condition is normal. For
vehicles with this style trim cover, disregard references to rubber washer and proceed with remainder of repair.