Regal V6-252 4.1L (1984)
1987 models built on or after August 4, 1986 (Julian date 216)
Models built after implementation of the feed/bleed system can be serviced with individual parts.
IMPORTANT:
When servicing the forward clutch, select the correct backing plate (627). Backing plate selection affects piston travel, shift feel and
clutch durability.
FIGURE 3
Backing Plate Selection (Clutch fully assembled):
Apply an evenly distributed load in the direction indicated in Figure 3 to remove slack from the clutch assembly. Use 20 lbs. (9kg) of pressure against
the backing plate--excessive pressure will cause an inaccurate measurement. With the clutch assembly compressed, use a feeler gauge to measure the
distance between the backing plate and snap ring. Correct backing plate travel is 0.7 mm-1.5 mm (0.028"-O.059").
SERVICE PARTS INFORMATION
1984-87 models (excluding 84-85 CZ, JY) built before August 4, 1986 (Julian date 216):
PART NUMBER
DESCRIPTION
8638957
Neutral Drive Shift Package (Contains Forward
Clutch Assembly, Complete; Front Internal Gear
and Thrust Washer)
FIGURE 4
1987 models built on or after August 4, 1987 (Julian date 216):
8648720
Forward Clutch Assembly, Complete
8638956
Forward Clutch Housing Package