Regal V6-3.8L VIN K (1997)
Vehicle Lifting: Service and Repair
GENERAL VEHICLE LIFTING AND JACKING
CAUTION: To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle at the opposite end from
which components are being removed. The additional support will reduce the possibility of the vehicle falling off the hoist. When removing
major components from the vehicle while the vehicle is on a hoist, the vehicle frame should be chained to the hoist pads at the same end as the
removed components to prevent tip-off. Failure to follow these precautionary measures could result in vehicle damage, serious personal injury
or death.
CAUTION: To help avoid personal injury, always use jackstands when working on or under any vehicle that is supported only by a jack.
Important
^
When supporting the vehicle with jackstands, the supports should be placed under the body side rail pinchwelds or a similar strong and stable
structure. The vehicle should be on a clean, hard, level surface before any lifting procedure begins. All lifting equipment MUST meet weight
standards and be in good working order. Make sure all vehicle loads are equally distributed and secure.
