Rendezvous V6-3.5L (2007)
Antenna, Navigation: Service and Repair
Antenna Assembly Replacement - Cellular and Navigation
Antenna Assembly Replacement - Cellular and Navigation
Removal Procedure
1. Remove the windshield garnish molding.
2. Remove the sunshade from the headliner.
3. Remove the door edge molding from the door opening.
4. Lower the front corner of the headliner. Refer to Headlining Trim Panel Replacement.
5. Disconnect the wire harness from the roof antenna.
6. Remove the antenna nut.
7. Remove the antenna from the roof.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Attach the antenna base to the roof and fasten the antenna nut.
Tighten the nut to 2 N.m (18 lb in).
2. Connect the electrical connector to the antenna.
3. Push the headliner back into place. Refer to Front Side Door Trim Panel Replacement (Rendezvous).
4. Attach the sunshade to the headliner. Refer to Sunshade Replacement.
5. Attach the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement.
