Rendezvous V6-3.5L (2007)
5. Install the I/P compartment.
6. Install the right insulator panel.
Important: After replacing the vehicle communication interface module, you must reconfigure the OnStar(R) system. Failure to
reconfigure the system will result in an additional customer visit for repair. In addition, pressing and holding the white dot button on the
keypad will NOT reset this version of the OnStar(R) system. This action will cause a DTC to set.
7. Reconfigure the OnStar(R) system. Refer to Programming and Relearning See: Testing and Inspection/Programming and Relearning