Rendezvous V6-3.5L (2007)
16. Remove the windshield (1) from the vehicle with the aid of an assistant (2).
Installation Procedure
1. Install a stationary window into the opening.
2. Install the instrument panel upper trim panel.
3. Install the windshield garnish moldings.
4. Install the antenna connector.
5. Install the rearview mirror.
6. Install the door auxiliary weatherstrip from the upper pinchweld flange.
7. Install the air inlet grille.
8. Install the windshield wiper arms.
9. Remove the double layer of masking tape from around the perimeter of the painted surfaces and the interior trim.
10. Close the hood.
Windshield Reveal Molding Replacement
Windshield Reveal Molding Replacement
The windshield reveal molding is an applied molding design separate from the window. The reveal molding is bonded to the windshield and may be
bonded to the body. The reveal molding may be replaced with the windshield as an assembly, or the reveal molding may be available as a separate
service part. Refer to Urethane Adhesive Installation of Stationary Windows.
