Rendezvous AWD V6-3.4L VIN E (2005)
1. Position the anchor plate bezel to the floor.
2. Install the T-pin on the anchor plate using a small flat-bladed tool, pressing into place until fully seated.
3. Install the rear seats. Refer to the following procedures in Seats:
*
Seat Replacement - Rear Bucket (See: Seats/Service and Repair/Seat Replacement - Rear Bucket)
*
Seat Replacement - Rear 50-50 Split (See: Seats/Service and Repair/Seat Replacement - Rear 50-50 Split)