Rendezvous AWD V6-3.4L VIN E (2005)
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the screws to the cooling fan motor.
^
Tighten the screws to 6 Nm (53 inch lbs.).
4. Connect the cooling fan motor electrical connectors.
5. Install the cooling fans to the shroud.
6. Important: Turn the cooling fan nuts counterclockwise to tighten.
Install the cooling fan nuts.
^
Tighten the nuts to 6 Nm (53 inch lbs.).
7. Install the cooling fan assembly including the shroud.