Rendezvous AWD V6-3.4L VIN E (2005)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the valve rocker arm cover bolts.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
5. Install the vacuum hose to the grommet in the engine right side valve rocker arm cover.
6. Install the ignition module bracket with the coils.
7. Install the EVAP canister purge solenoid valve.
8. Connect the vacuum hoses from the EVAP canister purge solenoid valve.
9. Connect the engine right side spark plug wires.
10. Install the generator bracket.
11. Install the generator.
12. Install the drive belt.