Rendezvous AWD V6-3.4L VIN E (2005)
5. Install the upper intake manifold studs and bolts.
^
Tighten bolts to 25 Nm (18 ft. lbs.).
6. Install generator through bolt bracket.
7. Connect the vacuum hose connections to the upper intake manifold:
^
Heater and air conditioning vacuum source hose
^
Fuel pressure regulator
8. Connect the vacuum brake booster hose to the upper intake manifold.
9. Install and connect the emission control vacuum harness.
10. Connect the vacuum hose to the MAP sensor and the upper intake manifold.
11. Connect the wiring harness to the MAP sensor.
12. Install the ignition coil bracket with the coils.
13. Install the EVAP canister purge solenoid valve.
