Rendezvous AWD V6-3.4L VIN E (2005)
Negative: Service and Repair
Replacement procedure
BATTERY NEGATIVE CABLE REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: When replacing battery cables, be sure to use battery cables that are the same type, gauge and length.
1. Remove the battery ground (negative) cable from the battery.
2. Remove the battery ground (negative) cable bolt from the core support.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the lower radiator baffle.
5. Remove the battery cable conduit from the conduit retainers.
6. Remove the battery cable from the conduit.
7. Remove the battery ground (negative) cable nut and cable from the transaxle stud.
8. Lower the vehicle.
9. Remove the battery ground (negative) cable from the vehicle.
INSTALLATION PROCEDURE
1. Install the battery ground (negative) cable to the vehicle.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Install the battery ground (negative) cable and nut to the transaxle stud.