Rendezvous AWD V6-3.4L VIN E (2005)
Alternator: Service and Repair
Generator Bracket Replacement
GENERATOR BRACKET REPLACEMENT
REMOVAL PROCEDURE
1. Remove the generator.
2. Remove the drive belt tensioner.
3. Remove the generator bracket bolts.
4. Remove the generator bracket.
INSTALLATION PROCEDURE
1. Install the generator bracket.
2. Install the generator bracket bolts.
Tighten the generator bracket bolts in the sequence shown to 50 N.m (37 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the drive belt tensioner.
4. Install the generator.
