Rendezvous AWD V6-3.4L VIN E (2005)
13. Remove the lower ball joint nut.
14. Use the utility stand in order to lower the lower control arm and relieve the coil spring tension.
15. Remove the utility stand.
16. Carefully remove the coil spring (2).
Installation Procedure
1. Install the coil spring.
2. Install the spring jounce bumper to the spring.
3. Index and install the spring insulator to the spring (2).
4. Index and install the spring assembly to the control arms (1).
5. Use the utility stand in order to raise the lower control arm.