Rendezvous AWD V6-3.5L VIN L (2006)
19. Remove the condenser mounting bolts.
20. Remove the condenser from the radiator.
21. Remove the receiver dehydrator upper bracket bolt.
22. Remove the receiver dehydrator lower mounting bolts.
23. Disconnect the receiver dehydrator from the condenser.
24. Remove and discard the sealing washers.
INSTALLATION PROCEDURE
1. If replacing the condenser add the specified amount of PAG oil directly to the condenser. Refer to Refrigerant System Capacities.
2. Install new sealing washers to the receiver dehydrator.
3. Connect the receiver dehydrator to the condenser.
4. Install the receiver dehydrator lower mounting bolts.
Tighten the bolts to 6 N.m (53 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.