Rendezvous AWD V6-3.5L VIN L (2006)
Relay Box: Service and Repair
Underhood Electrical Center or Junction Block Replacement
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the underhood accessory wiring junction block cover.
1. Release the retaining tabs (1).
2. Remove the underhood accessory wiring junction block cover (2).
3. Disconnect the positive battery cable.
1. Remove the nut (1).
2. Position the positive battery cable (2) aside.
4. Remove the underhood accessory wiring junction block.
1. Loosen the wiring harness retaining bolts (1).
2. Release the four underhood accessory wiring junction block retaining clips (2).
3. Lift the underhood accessory wiring junction block (3) out of the mounting bracket.
4. Disconnect the electrical connectors.
5. Remove the underhood accessory wiring junction block (3).
INSTALLATION PROCEDURE
1. Align the electrical connectors to there slots in the underhood accessory wiring junction block bracket.