Rendezvous AWD V6-3.6L VIN 7 (2004)
Backing Plate: Service and Repair
Drum Brake Backing Plate Replacement
Tools Required
^
J37043 Parking Brake Cable Release Tool
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions.
Notice: Do not pry against the splash shield or backing plate in attempt to free the drum. This will bend the splash shield or backing plate. A bent
backing plate may cause brake chatter and/or pulsation.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake drum.
4. Remove the brake shoes.
5. Remove the park brake cable from the park brake actuator lever.
6. Using the J37043 , remove the park brake cable ONLY from the backing plate.
7. Remove the wheel cylinder (3).