Rendezvous AWD V6-3.6L VIN 7 (2004)
3. Install the HVAC control module retaining screws.
Tighten
Tighten the screws to 2.5 N.m (22 lb in).
4. Install the IP cluster trim plate bezel.
IMPORTANT: Do not adjust any controls on the HVAC control module while the HVAC control module is self-calibrating. If interrupted, improper
HVAC performance will result. The engine must be running for proper calibration to occur.
5. Start and allow the engine to run for a least one minute.
