Rendezvous AWD V6-3.6L VIN 7 (2004)
4. Connect the console accessory wiring junction block electrical connectors (1, 2).
NOTE: Refer to Fastener Notice in Service Precautions.
Install the console accessory wiring junction block electrical connectors bolts (1, 2) finger tight until seated.
Tighten
Tighten the console accessory wiring junction block electrical connectors bolts to 6 N.m (54 lb in).
5. Connect the BCM electrical connectors (1, 2, 3).
6. Install the front floor console.
7. Connect the negative battery cable.
