Rendezvous FWD V6-3.4L VIN E (2005)
9. Remove the spring seat/valve stem oil seal.
Installation Procedure
1. Install the valve stem oil seal/spring seat.
^
Use a suitable driver.
^
Press over the valve guide boss.
2. Install the valve spring.
3. Install the valve cap.
4. Use the J 38606 in order to compress the valve spring.
5. Install the valve keys. If necessary, hold the valve keys in place with grease.
6. Remove the J 38606 in order to release the valve spring.
7. Ensure that the valve keys are seated.
8. Install the valve rocker arm.
9. Release the air pressure and remove the J 22794.
10. Install the spark plug.