Rendezvous FWD V6-3.5L VIN L (2006)
Garage Door Opener Transmitter: Service and Repair
Garage Door Opener Replacement
GARAGE DOOR OPENER REPLACEMENT
REMOVAL PROCEDURE
1. Release the barbed tab at the center of the access panel.
2. Swing the panel down and forward in order to access the module.
3. Disconnect the electrical connector from the module and switch assembly.
4. Remove the screws that retain the garage door opener and the switch assembly to the console.
5. Remove the opener and the switch assembly from the console.
INSTALLATION PROCEDURE
1. Align the LED indicator with the hole in the access panel when setting the opener into place.
2. Install the opener and the switch assembly to the console.
3. Install the screws that retain the opener and the switch assembly to the console.
Tighten the screws to 2 N.m (18 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.