Rendezvous FWD V6-3.5L VIN L (2006)
Speaker: Service and Repair
Speaker Replacement - Rear Door
SPEAKER REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
1. Remove the rear door trim panel.
2. Remove the screws from the speaker.
3. Disconnect the electrical connector from the speaker.
4. Remove the speaker from the rear door.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the rear door speaker.
2. Align the speaker to the rear door and install the screws.
Tighten the speaker screws to 3.2 N.m (28 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the rear door trim panel.