Rendezvous FWD V6-3.5L VIN L (2006)
Trim Panel: Service and Repair
Carpet Trim Plate Replacement - Rear Floor
CARPET TRIM PLATE REPLACEMENT - REAR FLOOR
REMOVAL PROCEDURE
1. Remove the rear seats.
2. Release the T-pin retainer in the anchor plate bezel using a small flat-bladed tool.
3. Remove the anchor plate bezel from the floor.
INSTALLATION PROCEDURE
1. Position the anchor plate bezel to the floor.
2. Install the T-pin on the anchor plate using a small flat-bladed tool, pressing into place until fully seated.
3. Install the rear seats.