Rendezvous FWD V6-3.5L VIN L (2006)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Left Rear
Park Brake Cable Replacement - Left Rear
Removal Procedure
Caution: Refer to Brake Dust Caution.
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Loosen the park brake cable equalizer nut in order to remove the park brake left side cable from the park brake equalizer.
4. Remove the rear park brake cable retaining nut and bolt.
5. Remove the park brake cable from the park brake actuator.
6. Drill out the 2 rivets (1) retaining the park brake cable to the rear crossmember.
Installation Procedure
1. Install the park brake cable.