Rendezvous FWD V6-3.5L VIN L (2006)
16. Remove the screws retaining the heater core cover.
17. Remove the heater core cover.
18. Remove the heater core pipe retaining screw.
19. Remove the heater core from the HVAC module.
INSTALLATION PROCEDURE
1. Install the heater core to the HVAC module case.
2. Install the heater core pipe retaining clamp screw.
Tighten the screw to 0.9 N.m (8 lb in).
NOTE: Refer to Fastener Notice.
3. Install the heater core cover.
4. Install the heater core cover retaining screws.
Tighten the screws to 0.9 N.m (8 lb in).
5. Install the heater outlet duct.
6. Install the heater outlet duct screws.
Tighten the screws to 0.9 N.m (8 lb in).
7. Install the I/P harness to heater core cover tie strap.