Rendezvous FWD V6-3.5L VIN L (2006)
1. Apply sealant GM P/N 12378521 (Canadian P/N 88901148), or the equivalent, to the keyway of the balancer.
2. Install the crankshaft balancer. Use the J29113.
3. Remove the J29113.
4. Install the J37096 to the flywheel to prevent flywheel rotation.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the crankshaft balancer washer and the bolt.
Tighten the bolt to 160 Nm (118 ft. lbs.).
6. Remove the J37096 from the flywheel.
7. Install the torque converter cover.
8. Raise the frame to the original position.
9. Install and tighten the frame bolts.
10. Install the right engine splash shield.
11. Install the right front tire and wheel.
12. Install the drive belt.