Rendezvous FWD V6-3.5L VIN L (2006)
8. Remove the engine oil cooler pipe bolt (1), if equipped.
9. Remove the engine mount strut/AC compressor bracket bolts.
10. Remove the engine mount strut/AC compressor bracket.
Installation Procedure
1. Install the engine mount strut/AC compressor bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount strut/AC compressor bracket bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the engine oil cooler pipe bolt (1), if equipped.
Tighten the bolt to 10 Nm (89 inch lbs.).