buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Idler Pulley > < Engine Mount Replacement - Right|Page 3552
Page 4
background image

11. Install the left side lift hook assembly to the left side hole in the J45057 (2).
12. Gently tighten the J28467-34 lift hook wing nuts.
13. Raise the vehicle. Refer to Vehicle Lifting.
14. Remove the lower air baffle. 
15. Remove the engine mount left bolt.

16. Install the J45057-2 to the radiator core support.
17. Use the engine mount bolt to install the J45057-2 to the engine.

18. Ensure that the J45057-2 is assembled properly and hand tighten the fasteners.

Idler Pulley > < Engine Mount Replacement - Right|Page 3552