Rendezvous FWD V6-3.5L VIN L (2006)
1. Install a NEW oil pan gasket. If you are installing the rear main bearing cap, apply sealer GM P/N 12378521 (Canadian P/N 88901148) or
equivalent to both sides of the crankshaft rear main bearing cap (1). Press sealer into gap using a putty knife
2. Install the oil pan.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the oil pan bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
4. Install the oil pan side bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).