Rendezvous FWD V6-3.5L VIN L (2006)
Exhaust Manifold: Service and Repair
Exhaust Manifold Replacement - Right
Exhaust Manifold Replacement - Right (RPO LX9)
Tools Required
^
J41131 Engine Tilt Strap
Removal Procedure
1. Rotate the engine forward for service access.
2. Remove the manifold absolute pressure (MAP) sensor.
3. Remove the exhaust gas recirculation (EGR) valve.
4. Remove the heated oxygen sensor (HO2S) connector position assurance (CPA) retainer.
5. Disconnect the HO2S electrical connector.
6. Remove the HO2S electrical connector clip from the ignition coil bracket.