Rendezvous FWD V6-3.5L VIN L (2006)
5. Install the receiver dehydrator upper bracket bolt.
Tighten the bolt to 6 N.m (53 lb in).
6. Install the condenser to the radiator.
7. Install the condenser mounting bolts.
Tighten the bolts to 6 N.m (53 lb in).
8. Install the condenser tube clip.
9. Install the condenser tube clip bolt.
Tighten the bolt to 2.5 N.m (22 lb in).
10. Install the radiator and condenser assembly.
11. Remove cap or tape from the evaporator inlet tube.
12. Install a new sealing washer to the evaporator inlet tube fitting.
13. Install the evaporator inlet tube and bolt to the condenser block.
Tighten the bolt to 16 N.m (12 lb ft).
14. Remove cap or tape from the A/C discharge hose.
15. Install a new sealing washer to the A/C discharge hose fitting.
16. Install the A/C discharge hose and nut to the condenser block.
Tighten the nut to 16 N.m (12 lb ft).
17. Connect the lower TOC line to the radiator.
