Rendezvous FWD V6-3.5L VIN L (2006)
Evaporator Core: Service and Repair
EVAPORATOR CORE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the HVAC module assembly.
2. Remove the air inlet housing screws.
3. Remove the air inlet housing from the HVAC module.
4. Remove the right side HVAC module assembly mounting bracket screws.
5. Remove the right side HVAC module assembly mounting bracket.
6. Remove the HVAC module upper retaining screw.
IMPORTANT: The HVAC module assembly upper retaining screw is located under the right side HVAC module assembly mounting bracket.
7. Remove the HVAC module assembly to dash panel sound barrier seal.
8. Remove the screws retaining the heater outlet duct.
9. Remove the heater outlet duct.
