Rendezvous FWD V6-3.5L VIN L (2006)
1. Install a new O-ring seal on the inlet pipe.
2. Install the inlet pipe to the thermostat housing.
3. Install the heater inlet pipe nut.
Tighten the nut to 25 N.m (18 lb ft).
NOTE: Refer to Fastener Notice.
4. Connect the inlet heater hose (1) to the inlet heater pipe (2).
5. Install the thermostat bypass pipe.
6. Install the air cleaner outlet duct.
7. Fill the coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill) in Cooling System.
