Rendezvous FWD V6-3.5L VIN L (2006)
10. Remove the spark plug wire(s) from the engine.
11. If you are replacing the spark plug wire(s), transfer any of the following components:
-
Spark plug wire conduit
-
Spark plug wire retaining clips
INSTALLATION PROCEDURE
1. Install the spark plug wire(s) to the engine.
2. Install the spark plug wire(s) to the retaining clip.
3. Install the spark plug wire(s) (1, 3, and 5) to the ignition coil.
4. Install the spark plug wire(s) (1, 3, and 5) to the right side spark plug(s).
5. Release the tension on the J 41131.
6. Remove the J 41131.
7. Install the engine mount struts.
8. Install the spark plug wire(s) to the retaining clips.
9. Install the spark plug wire(s) (2, 4, and/or 6) to the ignition coil.
10. Install the spark plug wire(s) (2, 4, and/or 6) from the left side spark plug(s).
11. Install the intake manifold cover.