Rendezvous FWD V6-3.5L VIN L (2006)
Evaporative Emissions Hose: Service and Repair
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - CHASSIS/CANISTER
REMOVAL PROCEDURE
1. Disconnect the evaporative emission (EVAP) purge hose from the purge solenoid.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Disconnect the EVAP purge line from the fuel tank.
4. Disconnect the EVAP purge pipe from the fuel pipe retainers.
5. Remove the EVAP purge pipe from the vehicle.
INSTALLATION PROCEDURE